T-Lock™
Stealth
TeleScoping Poles™
Designed for military special forces, these are the most rigid telescoping
poles available. Made with light-weight, high-strength aluminum alloy,
a 30-ft (10 meter) pole weighs only 13 lbs. Tip deflection depends
upon load, with normal load, deflection at full extension is nominal.
Suitable for military, police, engineers, or rescue personnel to place
climbing lines, cable ladders or other special use items or equipment in
places 7 to 12 meters above ground (or sea) level.
The pole is available with a variety of tips:
Universal Mount (use with
any Special Tools)
1/2-inch Hollow Shaft (optional
threaded *) fits Laser Hook & Tech Hook
GPS Thread (5/8 x11)
Broom Thread
Plastic Plug (5/16 x18 metal threads)
Boat Hook
Custom fittings, tools or miniature electronic devices may be designed
for possible use in substitution of the final tube segment by special request.
T-Lock™ Stealth TeleScoping Poles™ cannot be disassembled and will not
come apart in the field. Poles when locked at full extension provide
substantial torque or twist capability by user to the tip end. Locked
poles cannot accidentally collapse in use. Very high strength fore
and aft on axis of pole, locked segments cannot slip loose. Locked
fully extended, poles may be used upright, horizontal or inverted.
Functionality of pole is limited to the reasonable limits of an individual's
personal strength and ability to control the hook-end of the pole at distance.
Poles longer than 30-feet or with heavy tip load, require counterweights
attached at the base for safe use.
Individual Custom T-Lock™ TeleScoping Poles may be produced on
short notice. Large batches of poles available by special order with
8 to 12 weeks for delivery. Prices may vary according to market rate
of raw Aluminum.
Marine T-Lock™ Stealth TeleScoping Poles™ designed specifically
for special operations at sea available with marine quality Lucite®
foam floatation. Tip segment is foam filled and sealed, base segment
is wrapped with four adjustable floatation sleeves which may be trimmed
to exact buoyancy preference.
For further information Email
or Call.
Internal steel locking pins are capped with nylon tip slides for smooth
operation (if for use in high heat environment, please specify,
so that pole can be made without nylon slides).
. |